Adjust your blades for best cut.

Find the ‘Sweet Spot”. Although the NaturCut and Brill mowers come ready to cut from the factory we advise taking a few minutes to fine tune the blade gap for your lawn. Every reel mower will require some overlap in the cutting pattern to produce the best results but if you find that a few grass blades are left uncut across the whole swath (too much gap) or that your mower is binding on the grass or leaving a scalloped pattern (too little gap) then you should adjust the blade gap. This is a simple procedure outlined in our Support Section under the tab “Walter’s Simple Adjustment Method”.
asdfasdf